Static Solutions for Winders, Unwinders and Slitters in Converting

Static electricity causes severe problems throughout winding and unwinding applications, whether using plastic film, paper or textiles.

Industry: Converting
Static Solutions for Winders, Unwinders and Slitters in Converting - Select a problem:

A 3024L or NEOS Intelligent Static Eliminator can be positioned above or below the reel. The ionisation should ideally be aimed at the nip between the reel and the incoming web.

Where there is a lay-on roller, the best position for a XIFOS 33 or NEOS Intelligent Static Eliminator is on the side where the film leaves the lay-on roller. If this is not possible, then position the static eliminator on the opposite side of the reel.

Ideally position a long range, DC static eliminator such as XIFOS 33 with intelligence, so that the ionisation neutralises the charge at both rewind positions.

If access is limited or movement of the machinery prohibits using just one anti-static bar, then a dedicated static eliminator at each position can be the solution.

Centre Winder

Lay On Roller

Turret Rewind

How can we help?

Fraser provides fast, efficient and knowledgeable support. For technical advice or to discuss a custom solution for your application, please get in touch.

Get in touch