The 3024L is a compact and powerful static eliminator, with built-in electronics and 24 V DC supply.

Most successful 24 V DC static eliminator

Used by thousands of manufacturers worldwide

High performance, control and feedback

LEDs showing operational status, duplicated for remote monitoring

Wide range of medium range applications

Neutralising static at distances up to 500 mm

The 3024L is the ultimate static eliminator for machinery manufacturers: compact, with built-in fully-encapsulated electronics, 24 V DC supply and very powerful performance.  Ideal for applications with changing geometry, the 3024L Static Eliminator provides medium range static neutralisation to meet the requirements of high performance machinery.

  • Operating distance 100 – 500 mm
  • 50 mm emitter pitch for extended range
  • Shockless, resistively coupled tungsten emitters for unlimited life
  • 100 % coverage: active length = overall length of the bar
  • 24 V DC operation, with 11 kV ionising power integrated into bar
  • LED indication of operational status of bar, with duplicate remote signals for PLC or to power external lamps, relays
  • Remote on/off switching

The 3024L Static Eliminator is specified by hundreds of OEMs and used by manufacturers in countless industries worldwide.

For shorter range applications from 25 – 150 mm, and ideal for fast-moving materials, see the 3024F Static Eliminator.


  • 100 – 250 V AC-DC 24 V Power Supply (Part No: E3024-PSU)

The best choice of product depends upon process speed, the distance of the static eliminator from the target and the level of static charge to be neutralised. Please get in touch for further assistance.


FR-ABS industrial grade extrusion, epoxy resin, tungsten emitters.


22 x 41.5 mm (W x H).
Available Lengths: minimum order length 300 mm, then in 100 mm steps to 5000 mm.


1.1 kg/m.

Output Voltage

Up to 11 kV supply integrated into bar.

Remote Monitor / Local Status Indication

Signals available: ‘Bar OK’ and ‘Fault’. Uses 24 V supply to send signal from the bar to the PLC or other destination. Bi-colour LED on endcap for local status indication.

Electrical Input

24 V DC (21-28 V), maximum current required 0.5 A. M8 4-pin connector. The M8 x 4-core cable must be ordered separately.


0 – 55 °C, 70 % rH non-condensing max. IP66. Fully sealed.


CE, CB and UL. Cleanroom classification to ISO Class 4.


100 – 250 V AC-DC 24 V Power Supply (Part No: E3024-PSU)

3024 – Compact and powerful static eliminator with built-in electronics

Industrial Static Electricity – Its causes, effects and solutions

How can we help?

Fraser provides fast, efficient and knowledgeable support. For technical advice or to discuss a custom solution for your application, please get in touch.

Get in touch