9055-2 Power Unit
Fraser’s comprehensive range of power units
Uses American-style bayonet connectors
Two connections for combined bar and cable length of 12 m
Illuminated on/off switch, USA/Canada UL certification
The 9055-2 is part of Fraser’s comprehensive family of advanced power units which provide the high voltage required to produce ionisation in our range of AC static eliminators.
A compact power unit, the 9055-2 is designed to serve up to two static eliminators.
- Conforming to the highest market standards, the 9055-2 provides 5.5 kV of ionising power
- Low running costs (typically 25 W)
- Exceeds international safety requirements with fully encapsulated windings, current-limited design and automatic shut-down if there is a short on the static eliminator
The 9055-2 has American-style bayonet connectors, with a separate earth wire.
It has an illuminated on/off switch and is supplied with 2.2 m of hard-wired mains cable.
The best choice of product depends upon process speed, the distance of the static eliminator from the target and the level of static charge to be neutralised. Please get in touch for further assistance.
Powder coated steel case. Transformer with fully encapsulated windings.
89 x 82.5 x 116.2 mm (W x H x L). 140 mm L including mounting brackets.
5.5 KV, secondary current limited to 5 mA.
12 m of combined bar and HT cable.
The design is current-limited to 5 mA. If more than 5 mA current is drawn the transformer is designed to shut down. Power will restart when the excessive load or fault is removed.
115 V or 230 V, 50/60 Hz. Please specify input voltage. 2.2 m hard-wired mains cable is supplied.
50 °C maximum temperature. 70 % rH non-condensing max. Location should be dry and oil-free.
CE and UL.
Industrial Static Electricity – Its causes, effects and solutions
How can we help?
Fraser provides fast, efficient and knowledgeable support. For technical advice or to discuss a custom solution for your application, please get in touch.Get in touch