The 3024F is a compact and powerful short range static eliminator, with built-in electronics and 24 V DC supply.

Most successful 24 V DC static eliminator

Used by thousands of manufacturers worldwide

High performance, control and feedback

LEDs showing operational status, duplicated for remote monitoring

Wide range of applications

Used throughout industry including cleanrooms to ISO Class 4

The 3024F is the ultimate static eliminator for machinery manufacturers: compact, with built-in electronics, 24 V DC supply and very powerful performance.  Tested at speeds up to 1300 m/min, the 3024F Static Eliminator provides short range static neutralisation to meet the requirements of high performance machinery.

  • Operating distance 25 – 150 mm
  • 25 mm emitter pitch for intense ionisation
  • Tungsten emitters guarantee an unlimited life, resistively coupled for shockless operation
  • No dead zone: active ionisation length equals physical length of the bar
  • 24 V DC operation, with 11 kV ionising power integrated into bar
  • LED indication of operational status of bar, with duplicate remote signals for PLC or to power external lamps, relays
  • Remote on/off switching

The 3024F Static Eliminator is specified by hundreds of OEMs and used by manufacturers in countless industries worldwide.

For longer range applications from 100 – 500 mm with changing geometry, see the 3024L Static Eliminator.


  • 100 – 250 V AC-DC 24 V Power Supply (Part No: E3024-PSU)

The best choice of product depends upon process speed, the distance of the static eliminator from the target and the level of static charge to be neutralised. Please get in touch for further assistance.


FR-ABS industrial grade extrusion, epoxy resin, tungsten emitters.


22 x 41.5 mm (W x H).
Available Lengths: minimum order length 250 mm, then in 50 mm steps to 5000 mm.


1.1 kg/m.

Output Voltage

Up to 11 kV supply integrated into bar.

Remote Monitor / Local Status Indication

Signals available: ‘Bar OK’ and ‘Fault’. Uses 24 V supply to send signal from the bar to the PLC or other destination. Bi-colour LED on endcap for local status indication.

Electrical Input

24 V DC (21-28 V), maximum current required 0.5 A. M8 x 4-pin connector.
The M8 x 4-core cable must be ordered separately.


0 – 55 °C, 70 % rH non-condensing max. IP66. Fully sealed.


CE, CB and UL. Cleanroom classification to ISO Class 4.


100 – 250 V AC-DC 24 V Power Supply (Part No: E3024-PSU).

3024 – Compact and powerful static eliminator with built-in electronics

Industrial Static Electricity – Its causes, effects and solutions

How can we help?

Fraser provides fast, efficient and knowledgeable support. For technical advice or to discuss a custom solution for your application, please get in touch.

Get in touch