1250 Air Bar Static Eliminator
The 1250 Air Bar uses low pressure compressed air to extend the effective static neutralisation range of the 1250, 1250-S or EX-1250 bars to over 500 mm.
Based on best-selling 1250-S Static Eliminator
All the benefits of the 1250-S, with extended range and applications
Airflow reaches difficult places
Blows ions into roller nips, through rollers and past metal parts
Good 3-dimensional performance
Blows ions around bottles, containers, mouldings
The 1250 Air Bar uses low pressure compressed air to extend the effective static neutralisation range of the 1250, 1250-S or EX-1250 bars to over 500 mm. It is used for blowing ionised air into a restricted space, onto a product which moves in position or onto a substantially 3-dimensional product.
- All the advantages of the 1250-S Static Eliminator but with an extended range
- Shockless, stay-sharp emitters at 10 mm pitch for high performance over time
- Robust construction with fully encapsulated electrical parts for reliability
- Standard airpipe is 12 mm aluminium with 1 mm air holes every 15 mm
- Wide selection of Fraser Power Units, including remote monitoring of operational status
The extended range of the 1250 Air Bar make it ideal for preventing film sticking to rollers and unwinders, keeping sensors clean and free of static, as well as neutralising mouldings on conveyors or containers full of plastic products.
The best choice of product depends upon process speed, the distance of the static eliminator from the target and the level of static charge to be neutralised. Please get in touch for further assistance.
Construction
The 1250 Air consists of a 1250-S Static Eliminator Bar mounted onto an air pipe.
See separate Datasheet for 1250-S.
Dimensions
1250-S: 20 x 32 mm (W x H).
Available Lengths: 60 mm to 2500mm.
Cable
2 m of flexible screened cable supplied unless otherwise specified at time of order.
Power Unit
Use with a Fraser HP Power Unit operating at 5.5 - 6 kV. See choice and details on separate Datasheets.
Air Supply
Compressed air must be clean and dry. Typical pressure 0.5 to 2.0 Bar.
Bars up to 1000 mm length: 10 mm OD push-fit connector at one end.
Bars from 1000 mm to 2500 mm: 10 mm OD push-fit connector at each end.
Environmental
60 °C maximum temperature. 70 % rH non-condensing max.
Certification
CE.
Industrial Static Electricity – Its causes, effects and solutions
How can we help?
Fraser provides fast, efficient and knowledgeable support. For technical advice or to discuss a custom solution for your application, please get in touch.
Get in touch