4800 DC Ionised Air Nozzle
24 V DC operation, with built-in electronics
Powerful performance with all of the advantages of modern ionisation technology
Most powerful ionised air nozzle
For both static neutralisation and cleaning performance
Wide range of applications
From cleaning small medical mouldings to robot arms and high speed processing
The 4800 DC Ionised Air Nozzle sets new standards in industrial static control technology, with powerful performance and all the advantages of advanced electronics integrated into the compact body. The 4800 DC is powered by 24 V DC.
The 4800 DC is the most powerful ionised air nozzle available. It provides static neutralisation faster than any competitive product and is about 50 % more powerful than our popular 4510 Ionised Air Nozzle. The flat nozzle produces intense air flow, transporting ionised air at high speed for optimal cleaning and blow-off capability.
- High cleaning thrust is achieved at lower air pressure, reducing air consumption and noise
- Use at close range for maximum thrust – optimal cleaning distance typically 50 – 100 mm
- All electronics fully encapsulated for protection and reliability
- Tungsten emitters guarantee a long life
- LED on body gives operational status and whether bar needs cleaning
- Remote on/off switching with standby plus signal for operational status
The 4800 DC Ionised Air Nozzle can be used in dust removal, cleaning and static neutralisation applications throughout industry.
The best choice of product depends upon process speed, the distance of the static eliminator from the target and the level of static charge to be neutralised. Please get in touch for further assistance.
Static Eliminator: PVC body, epoxy resin encapsulant, tungsten emitters.
80 x 51 x 33 mm (L x W x D) excluding connectors. Operational Length: 47 mm.
Static Eliminator – 100 g, Nozzle – 60 g (excluding connectors).
+/- 7 kV supply integrated inside Ioniser.
Remote Monitor / Local Status Indication
Signals available: ‘OK’, ‘Clean Me’, ‘Fault’ and ‘Standby’. Uses 24 V supply to send signal from the ioniser to the PLC or other destination. Outputs compatible with IEC 61131-2 Type 3 PLC inputs. Signal protected against short circuit or miswiring. Bi-colour LED on ioniser body for local status indication.
24 V DC (21 – 28 V). Maximum current 0.25 A. M8 connector.
For PSU and cable options, see 3024 UC Datasheet.
Air Pressure: Max 10 Bar.
Air Fitting: 6 mm OD push fit.
Air Consumption: 300 l/min @ 2 Bar.
Blowing Force: 2.4 N @ 2 Bar.
0 – 55 °C, 70 % rH non-condensing max. IP67.
CE and UL Certified (3024 Ultra-Compact incorporated within 4800 DC).
Industrial Static Electricity – Its causes, effects and solutions
How can we help?
Fraser provides fast, efficient and knowledgeable support. For technical advice or to discuss a custom solution for your application, please get in touch.Get in touch