The 4400 is a compact, highly efficient ionised air jet consisting of a 1260 Single Point Ioniser and a proprietary air nozzle, mounted in a metal block.

In-line design produces flat, high speed ionised air jet

For efficient cleaning, and sheet separation with excellent static neutralisation


Up to 36% less air consumption than 4 mm open pipe


OSHA compliant nozzle and fully shockproof ionisation

The 4400 Ionised Air Nozzle is part of Fraser’s comprehensive range of cleaning products for the neutralisation of static electricity and dust removal from mouldings, assemblies, PCBs, automobiles, graphics, optics and medical parts.

The 4400 is a compact, highly efficient ionised air jet which consists of a 1260 Single Point Ioniser Bar and a proprietary air nozzle, mounted in a metal block.  With up to 6 kV of ionising power provided by a Fraser HP Power Unit, the 4400 efficiently neutralises the static charge, allowing thorough cleaning or product separation.

  • Simple design optimises ionisation and blow-off power
  • Nozzle amplifies compressed air by up to 20:1 for economical operation
  • Flat, concentrated airflow – similar to the 4510 Ionised Air Nozzle, but with 90° air exit for restricted spaces
  • OSHA compliant, the low noise and versatile 4400 is easy to install

The 4400 Ionised Air Nozzle is widely used for product separation in automatic feeders, as well as removing dust and neutralising the static charge on small mouldings and similar parts.


The best choice of product depends upon process speed, the distance of the static eliminator from the target and the level of static charge to be neutralised. Please get in touch for further assistance.


1260 Ioniser: Stainless steel tube and PTFE insert, stainless steel emitter.
Body: black anodised aluminium. Air Nozzle: stainless steel.


See Datasheet.


Hi-Flex 30 kV screened cable with 70 mm bend diameter. Standard length is 2 m - longer lengths can be specified at time of order (subject to maximum load on power unit).


The ionisation system is shockless and meets OSHA and other safety standards, as the nozzle cannot be dead-ended.

Power Unit

Use with Fraser 5.5 kV and 6 kV power units. See Datasheets.

Air Supply

Air Pressure: max 7 Bar.
Air Fitting: 1/8“ female thread in black body, supplied with 6 mm OD push-fit connector.


60 °C max. 70 % rH non-condensing max.



Industrial Static Electricity – Its causes, effects and solutions

How can we help?

Fraser provides fast, efficient and knowledgeable support. For technical advice or to discuss a custom solution for your application, please get in touch.

Get in touch