The 4300 is an in-line compressed air ioniser for use where the ionisation of an existing air supply, in an ordinary compressed airline, is required.  This system can be used where compressed air is deployed to remove electrostatic contaminants or air separation systems are fitted to sheet feeding decks.

• Ionises the air in flexible pipework with 5.5 – 6 kV of ionising power provided by a 1265 Single Point Ioniser
• If positioned close to the discharge end, the recombination of ions will reduce and effectiveness increase
• Easy to install – standard air fitting is for 10 mm ID flexible airpipe; alternatively, the ¼” BSP female thread could be used for the customer’s air fittings and pipework
• Air fittings and pipework must be plastic and as large as possible to maximise life of ionised air in the pipe

The 4300 In-Line Ioniser is used in lower pressure applications, typically on sheet feeders and air separation systems.  It is not a high pressure fitting and must be installed on the discharge side of any control valve