EX-715 EX Static Meter
The EX-715 EX Static Meter enables investigation and monitoring of industrial static electricity problems and is certified for use in hazardous areas.
Essential tool for quality, safety and productivity in a hazardous area
Allows the engineer to investigate static problems quickly and accurately
Wide measurement range
10 V to 200,000 V range meets all usual requirements
Easy to use
Analysing sources of problem and the efficiency of corrective action
Certified for use in hazardous areas, the EX-715 Static Meter has been developed to investigate industrial static electricity problems.
The EX-715 measures static electricity levels from 10 V up to 200,000 V on the surface of a material or body at 100 mm distance. With a ‘hold’ facility to freeze the reading on the display, the Meter has two automatically selected ranges:
- 0 – 20 kV in 10 V increments
- 20 – 200 kV in 100 V increments
The EX-715 shows where and how the static electricity is generated, its magnitude and its polarity. This gives the engineer a scientific basis for analysis of the static problem, monitoring the efficiency of remedial actions and setting levels for acceptable standards.
For more information on ATEX and IECEx certification, download the EX-715 Datasheet.
To view all Fraser static meters, see Static Measurement.
Construction
Anodised aluminium case with recessed stainless steel sensing plate for maximum integrity and accuracy.
Dimensions
124 x 64 x 24 mm (H x W x D).
Weight
180 g.
Range / Resolution
0 V - 20 kV / 10 V increments and 20 kV - 200 kV / 100 V increments. Automatic range selection. Measurement at 100 mm.
Drift
<0.1 % in 10 secs.
Calibration
On a 150 mm x 150 mm charge plate. Can be calibrated on other charge plate sizes to meet country standards e.g. 450 mm x 450 mm for China.
Operation
Click button to zero. Click button again to ‘hold’ the reading. Third press reactivates reading. Automatic switch-off after 60 seconds. Low volt indicator shows condition of battery.
Equipment
EX static meters are supplied with carrying case, battery, earth lead and certificate of calibration.
Environmental
70 % rH non-condensing max.
Certification
In addition to ATEX and IECEx, EN-500081-1 (EMC) and BS7506-2 (Construction).
Industrial Static Electricity – Its causes, effects and solutions
Measurement of Static Electricity
How can we help?
Fraser provides fast, efficient and knowledgeable support. For technical advice or to discuss a custom solution for your application, please get in touch.
Get in touch